Skip to Content

Washers

  • Sizes :  6 MM to 80 MM OR 1/4 Inch - 3.25 Inches

  • Material Grades : 100 HV, 140 HV, 200 HV, 350 HV, 400 HV, Spring Steel, C-62, A2 (SS 304), A4 (SS 316)​

  • Finish : Zinc - Aluminium Flake (Dacromet | Geomet | Xylan), PTFE (Xylan), Electroplating, Hot Dip Galvanised, Black Phosphating

  • ** Additional specifications available as per customer requirements
 

DTI Washers

Also known as load-indicating washers, are designed to ensure proper bolt tension in bolted connections. They are often used in conjunction with preloaded bolt assemblies, 

Standards

EN 14399-9

 

Flat Washer

circular metal disc with a central hole. Typically used to distribute the load over a larger bearing surface either positioned below the head of a bolt or below the nut.

Standards

DIN 125| ISO 7089| ASTM F436| ASTM B18.22.1| EN 14399-5

 

Spring Lock Washer

Helical sprig split lock washers are a metal ring that is bent into a helical shape. Split Lock Washers are a left hand helix and allow the nut to be tightened in a right hand direction only. 

Standards

DIN 127 A | B

 

Structural Construction Washers

Hardened, structural washers, specifically designed for high-strength bolting applications, particularly in construction and engineering projects. They have increased thickness and larger OD

Standards

DIN 6916 |ISO 7416|EN 14399-6

 

Serrated Lock Washers

Also known as serrated safety lock washers or toothed washers, are designed to prevent screws, bolts, and nuts from loosening due to vibration or other forces. 

Standards

DIN 6978 A & J

 

Penny Washers

Also known as Form G washers and are characterised by on outer diameter approximately three times the nominal thread diameter. Used for increasing surface and stability during fastening

Standards

DIN 9021 |ISO 7093