Bolts and Screws
Sizes : 10MM to 50MM OR 3/8 Inch - 2 Inches
Lenghts : 50MM to 1000MM OR 2 Inches to 40 Inches
Material Grades : 4.6, 4.8, 5.6, 8.8, 10.9, 12.9, ASTM A193, A2 (304), A4 (316), A320 (B7/M, L7/M, B8/M), A307 (A, B & C)
Finish : Zinc - Aluminium Flake (Dacromet | Geomet | Xylan), PTFE (Xylan), Electroplating, Hot Dip Galvanised, Black Phosphating
Threads: Metric and Imperial (UNC, UNF, BSW, BSF)
- ** Additional specifications available as per customer requirements
Hex Head Bolts - Coarse Thread
Externally threaded fasteners with coarse threaded shank and hexagonal washer faced head and a chamfered tip to facilitate mating with an internally threaded component.
Standards |
Structural HV Screws
Externally threaded high-strength, heavy hexagon structural bolts with a large head. These bolts are commonly used in construction and industrial applications mainly.
Standards | DIN 6914 |ASTM A325 |ISO 7412 |ASME B18.2.6 |
Hex Head Bolts - Fine Thread
Externally threaded fasteners with fine threaded shank and hexagonal washer faced head and a chamfered tip to facilitate mating with an internally threaded component.
Standards |
Hex Flange Bolts
Externally threaded bolts having circular washer like flange under the head that
increases the bearing surface to distribute the load when the bolt is fastened
Standards | DIN 6921 |ASTM A193 |ASME B18.2.3.4 |
Socket Head Cap Screw
Externally threaded hexagon socket head cap screws are cylindrical head screws with an internal hexagonal drive suited for a hex / Allen key or wrench. Used in smaller spaces
Standards | DIN 912 |ISO4762 |ASTM A574 |ASME B18.3.1 |
Hex Socket Set Screws
Externally fully threaded headless screws with flat or cone point and an internal hexagonal drive at one end and a flat surface at the other. Used in smaller spaces
Standards | DIN 913 |DIN 914 |ISO 4026 |ISO 4027 |
Threaded Stud Bolts
Externally threaded headless bolts threaded all the way from one end to the other (full / all thread). They are designed for a nut to be applied on both ends
Standards | DIN 976 |ASME B18.13.2 |ISO 7412 |
Mushroom Head Carriage Bolt
These feature a smooth, domed head that prevents adjustment from above. The square shoulder under the head resists rotation when the nut is tightened fully on the shaft.
Standards | DIN 603 |ASTM A307 | ASME B18.5 |
Cup Head Nib Bolts
Externally threaded specialized fastener with a round head and a projection or "nib" (a small projection) on the bolt's shank to prevent turning during installation
Standards | DIN 607 |ASTM A307 | ASME B18.5 |
Counter Sunk Nib Bolt
Externally threaded specialized fastener with a flat, countersunk head and a "nib" (a small projection) on the bolt's shank to prevent turning during installation.
Standards | DIN 604 |ASME B18.9 |
Cylindrical Counter Sunk Screw
Externally threaded cylindrical countersunk screws with a flare nose and a "nib" on the bolt's shank to prevent turning during installation
Standards | DIN 792 |
U Bolts
Externally threaded specialized fastener characterized by their U-shape and are typically made of steel. Commonly used in applications like pipe bridges
Standards | DIN 3570 |